Little Monkey

www.littlemonkeycaving.co.uk

gallery/1b_customcolorscheme_t11

Rude Nora 2 - Features

engineered beyond compare

gallery/nora2 037

'Plug & play' forward LED module. Simply plug in a low cost upgrade module as and when LEDs improve; or maybe try out  a warm white module.

Flood LED optically enhanced to provide significantly improved depth of illumination versus bare LED; avoiding inevitable losses of light output within lamp body from a bare LED.

Better actual performance than lamps using bare LED at higher output / battery power consumption.

 
gallery/nora2 041

Narrow focused spot beam reflector for far reaching light. Hold switch forward (from any regular caving setting) for high power spot beam. Releasing switch returns to previous setting. Useful for route finding or a brief look around.

 

5 coloured battery charge level indicator LEDs. Also used to display status when programming power settings and configuring lamp.

 

Twin action switch (forward / backwards operation). Compact, discrete lever action design reducing the risk of accidental 'switch off' at inconvenient moments, whilst retaining ease of operation. Double O Ring switch seal.

 
gallery/flood optic

Very wide, very smooth flood LED optic; providing noticable forward punch (versus a bare flood LED), significanlty reduced light loss within lamp body, and eliminating shadows from lamp body / screw heads / spot optic. Also, reduced light pollution in peripheral vision if lamp is mounted too low on helmet, and far less annoying for fellow cavers than the intense light from a small single point exposed LED.

 
gallery/nora2 036
gallery/box and battery

Thick gauge silicone wire leads on battery / lamp cable connections.

 

Fitted battery pack extends from top of box to facilitate easy removal.

 
gallery/nora2 030
gallery/nora2 025.1

Low voltage AA battery compatible. Nora 2 expedition 3xAA battery holder (available seperately). Essential bit of support kit for the serious caver.

 

'Don't Panic' !!! 

(available separately)

 
gallery/nora 2 033

Thick wall alloy battery box lid. No wafer thin exposed battery box edges, susceptible to damage from abrasion and water ingress. Large section O ring.

 

Captive battery box lid. Avoid losing lid, and eliminating the need for remedial cabling to attach to box / helmet. Strong stainless spring clasps.

 
gallery/nora2 035
gallery/dont panic 5

Helmet fixing with two stainless screws; or using cable ties / shock cord etc orientated practically in two external battery box recesses.